Milky white UV top coat without sticky dispersion layer.
For permanent high-gloss sealing of artificial nails, color gels and UV polishes.
-
Crystal-clear high-gloss effect with "wet-look effect"
-
Resistant to scratches
-
Resistant to nail polish removers, acetone, and other commercially available solvents
-
Highly elastic polymer compounds seal any modeling system without cracking or flaking
-
Does not yellow or fade
-
Cures in all classic light curing lamps (UV–LED–CCFL)
-
Practical bottle with brush
Curing time:
UV/CCFL: 120 seconds
LED: 90 seconds
The curing time may vary depending on the lamp used. For best results, it is recommended to use only high-quality, professional lamps from renowned brands.
To ensure maximum gloss effect (e.g., if the UV/LED lamp has low light output), double the curing time.
IMPORTANT: After curing GLOSS+GO, let the nail surface cool down for at least 20 seconds before applying nail oil or hand care products.
Application as high-gloss sealer:
Apply an even, thin layer of GLOSS+GO onto the finished, filed and cleaned artificial nail and cure for 90–120 seconds depending on the lamp.
GLOSS+GO is also suitable for sealing UV/LED pedicures and Shellac manicures.
Please note that GLOSS+GO cannot be removed with acetone!
